192.168.l.0 IP is reserved for internal use by routers and could not be used by any device on a network. Any ping to this address or connection will fail.

Typically 192.168.1.0 IP address is used to define a subnet

Subnet /XX  Number of subnets  Number of hosts  Netmask  
252126255.255.255.128 (11111111.11111111.11111111.10000000)
26462255.255.255.192 (11111111.11111111.11111111.11000000)
27830255.255.255.224 (11111111.11111111.11111111.11100000)
281614255.255.255.240 (11111111.11111111.11111111.11110000)
29326255.255.255.248 (11111111.11111111.11111111.11111000)
30642255.255.255.252 (11111111.11111111.11111111.11111100)

For example if you define a subnet 192.168.1.0/25 it will mean that you have a a subnetwork with Netmask 255.255.255.128 and 126 hosts available to you in it. So in this case 192.168.l.0 is an address which is used to define a subnetwork. But since it is reserved for internal router purposes it could not be used as a functional IP address on the network.

So if any software gives you address 192.168.1.0 as an address of any device then it is a bug. It is possible that it is mistaken with IP address 192.168.0.1 since they are quite similar.

Below is an example of detailed info about 192.168.1.1 address where 192.168.l.0 is used in a definition of subnet.

Address: 192.168.1.1 11000000.10101000.00000001 .00000001

Netmask: 255.255.255.0 = 24 11111111.11111111.11111111 .00000000

Wildcard: 0.0.0.255 00000000.00000000.00000000 .11111111

Network: 192.168.1.0/24 11000000.10101000.00000001 .00000000 (Class C)

Broadcast: 192.168.1.255 11000000.10101000.00000001 .11111111

HostMin: 192.168.1.1 11000000.10101000.00000001 .00000001

HostMax: 192.168.1.254 11000000.10101000.00000001 .11111110

Hosts/Net: 254 (Private Internet)